English-language podcasts

Podcasts

3D Printing Made Easy

An episode can be the start of a conversation. Explore recent releases, share your thoughts, and meet through a ThinkMatch Roundtable.

Ask friends about this

Episodes to discuss

3D Printing Made Easy

PETG That Sticks: Picking a Brand and Saving Your PEI Plate

21 min

Getting reliable functional PETG parts depends on two things working together: a filament with consistent diameter that arrives dry, and a first layer that grips the bed during the print but releases cleanly afterward. In this episode you'll learn: PETG price differences come mainly from manufacturing process, diameter tolerance, color consistency and packaging, not from the raw material; the Prusa Research knowledge base describes PETG as an inexpensive, beginner-suitable material. Brand differences show up mainly in long prints, transparent colors, AMS use and visible production runs; for prototypes, organizers and workshop parts an affordable, well-reviewed brand is enough if it is dry and the profile is dialed in. Specialty variants such as reinforced or glow-in-the-dark PETG require a wear-resistant nozzle, which belongs in the total project cost. The Bambu Lab wiki ranks warp risk from highest to lowest as PC, PA-CF, PA, ABS, ASA, PETG, PLA, and recommends PETG alongside PLA, PLA

Discuss this episode

3D Printing Made Easy

Bambu Lab H3C: Buy, Upgrade From the H2C, or Go INDX?

14 min

Special episode on the new nine-tool Bambu Lab H3C: how it compares with its predecessor, the H2C, and with the Prusa CORE One L INDX, and who should buy, upgrade or wait. In this episode you'll learn: The Bambu Lab H3C launched on November 3, 2026, with nine individually heated PrintTools and an integrated nine-spool AMS 3H unit that forms the top cover and is required to run the printer. CNC Kitchen measured H3C tool changes at 6 to 7 seconds and about 50 mg of waste, versus roughly 40 seconds per change on the H2C, while Prusa's INDX uses roughly a fifth of the H3C's waste per swap. Despite the faster swaps, CNC Kitchen found the H3C only about 10% faster than the H2C in real-world prints, because most prints are limited by the nozzle's volumetric flow rate. The H3C's FlexFeed extruder accepts both 1.75 mm and 2.85 mm filament and, per Bambu Lab, reliably prints TPU down to 75A; all nine H3C nozzles are hardened steel rated up to 350°C, while Prusa says INDX nozzles are not designed

Discuss this episode