English-language podcasts

Woodshop Life Podcast

Shop Size?, Smoke Detectors, Cross Grain Issues, and MORE!!!

50 min

Listen through the publisher, then discuss the episode here or arrange an in-person Roundtable. Your city determines where to meet.

Roundtables are designed for groups of four, with a shared subject and room for everyone to speak. Come for discussion, with no dating expectation.

Guys Questions: Hey fellas, Zach from Minnesota here. I'd be interested in learning about what the different methods are for creating round table legs without using a lathe. Thanks as always for your time and expertise. I hope your projects are going well, and I hope that you are doing even better. Zach Owens I enjoy your podcast very much. I appreciate the range of topics covered as well as the Q&A format. I have been building furniture for over 45 years. I am 75 years old. Up until 20 years ago I operated in various basement shops, some tiny and some bigger, but then we moved to Maine and I was able to adapt an outbuilding into an 800 sq ft shop. I was in furniture heaven!! We have now moved to VT to be closer to our daughter’s family and I am shopless but plan on building a shop. I am curious, given your combined experience what would be the ideal size shop? Big enough to work in but not a lot of extra space. I have a cabinet Saw Stop with 36” table, 14” Laguna band saw, chop saw, 8” jointer, Parks 12” planer(company out of business in mid 1980s, a 400 lb machine) drill press, dust collector and lathe. I am thinking 500 to 600 sq ft—about the size of a 2 car garage. Should it be square or rectangular for work flow? I normally use an oil/varnish finish on cherry so I don’t need spray equipment. I build furniture—beds, all kinds of tables, bookshelves, cabinets, some built in drawer units and cabinets, etc. I am also just starting to dive into bowl turning. I have my own ideas but am looking forward to your thoughts. By the way, at 75 I am not interested in changing my work flows so ditching the table saw for a saw track to save space is not an option, nor do I want to have to store tools between use. I have refined my processes over the years that work well for me. Greg Hi all, Thank you for putting out one of the most informative podcasts out there. I feel I have learned a lot listening to all the episodes. My question is regarding bandsaws. I have never owned or even operated one. I am in the process of setting up a 200 sq ft shed space as a shop and wanted the option to add in a bandsaw to the arsenal. I started looking at the smaller 10" models with the Rikon 3062 (includes a stand) and the Laguna V10. I feel like people always say get the biggest you can afford because your needs will grow over time. Like most people setting up a shop I feel that budget is important so what are your thoughts. Which is a better tool to allow me to learn it with minimal frustration and setup? Are there other brands I should look at for a similar price point (grizzly?). My main needs will be cutting curves in hardwood to have templates and minimal resawing. Current tools: track saw, compact table saw, planer, sander, router with home made table, jig saw. Thanks, Viyeka Huy's Questions: I put up a smoke detector in my garage shop and it goes off when the sawdust is thick in the air. I wanted one in the shop because i just wanted to be more secure about fires in general, especially since i have multiple lithium batteries in the garage. I have heard that these batteries can potentially fail and cause fires. Also, i want to make sure I don’t accidentally burn down the shop with a forgotten oil rag or something. If you can’t tell i am anxious about shop fires lol. Is there any way to make the smoke detector work only for smoke or do i just need to disable it when working wood? Vaibhav Question regarding a Rikon 13 inch benchtop planer. I made the mistake of putting through lumber without checking it carefully enough. One of the pieces I planed had a small remanent of a staple. Of course, when it passed through, it left a ding one of the cutters. My bad. Now, when I put wood through the planer, the one cutter that has the ding makes a very faint line across the length of the board. Here is my question. I can easily just rotate the one cutter that has the ding. Should I rotate all cutters or just the one cutter with the ding? My concern is, if I only rotate the one cutter will I see an inconsistency between the one cutter that has been rotated and the other cutters that have a certain amount of wear? Darryl Love the show. Thank you for all you do. I am making a mantle top/face out of quartersawn white oak to fit onto an existing fireplace (see pic). the idea is to make a piece with two boards at right angles and screw it to the top of the fireplace. I plan on joining two boards with tongue and groove and gluing throughout the length plus a couple of mitered faces to fit the awkward angles of the fireplace. I am thinking this should be fine in terms of wood movement since it’s all quartersawn white oak but I’m getting a spidey sense that it might not be good. How would you tackle this? Vaibhav

Episode information is provided by the publisher. Listening takes place on the publisher’s service.

Listen at the source ↗

Featured places to meet in Palo Alto, CA

Explore these places and arrange a conversation through ThinkMatch.

City guide for Palo Alto, CA

Community Poll

A rule should not be introduced unless it can be enforced fairly.

Share your view, then see how readers voted. No sign-in required. This poll is shared across stories.

Do you agree or disagree?

Choose one answer

Common Quandary

A Common Quandary to discuss

Another conversation to explore, separate from this news story.

Your new television goes on sale elsewhere. Can you return it and buy the identical one cheaper?

A week after buying a television, another store offers the same model for much less. Your retailer refuses to match the price but allows unopened-looking returns. You could carefully repack the perfectly functional set.

Is a generous return policy permission to reverse a deal for any reason?

Explore this quandary